First ,Website:http://www.aidisenipixel.com, the characteristics of T-4000 system  1, 32-256 level grayscale controls, Gamma correction software.

 LedEdit 2, combined with video editing and broadcasting software, you can

 control the rules, special-shaped variety, such as point, line and surface light

 source.

 3, each controller 4 ports, each port five hundred and twelve-one thousand

 twenty fourths lamps.

 4, play content stored in the SD card, you can play single and multiple cascading.

 Note: T-4000 port carrying 512 light, speed of up to 30 frames per second, the

 port when the load exceeds 512 lamp, increase in frame rate with the number of

 lights is automatically reduced.T-4000 supported chips and software model relationship: Supported chipsLedEdit software-mode lsSingle load number of lampNotesLPD6803,D705,1101,U CS6909,UCS6912T-4000-68034000pixel LPD8806,LPD8809T-4000-88064000pixel TM1803,TM1804,TM1 809,TM1812, ,UCS1903T-4000-TM4000pixelTM1804 and TM1809 of high speedStandard DMX,HX512T-4000-DMX680/2048PixelCompatible with standard DMX512 ProtocolWS2801,WS2803T-4000-WS4000pixel TLS3001,TLS3002,TL S3005 ,TLS3008T-4000 -TLS4000pixel P9813  T-4000 -P98134000pixel SM16715  T-4000-SM167154000pixel SM16716T-4000-SM167164000pixel BS0815,BS0825,BS090

     1T-4000-08154000pixel Second, the system architecture diagram  

 T-4000 single-control structures:

 1, SD card offline play.

 2, 4-port data output.

 3, five hundred and twelve-one thousand twenty fourths pixels per port.top of the controller ： DC5V   5 V power inputPOWERPower indicatorERRORError indicatorSYNCCascade  synchronization  signal

     indicatorSD CARDSD card slotController buttons on the surface: SETSave Settings to save current settings file and the

     playback speedMODESwitch FileSPEED Speed up the playback speedSPEED-Slow down the playback speedSpecific parameters:

 Storage card:

 Type: SD card (such as control lights for a time the number of recommended

 using a high speed SD card)

 Capacity: 256MB-2GB

 Format: FAT format

 Storing files: *.led

 Physical parameters:

 Operating temperature:-20  ℃-85° c

 Working power supply: 5V DC input

 Power consumption: 8W

 Notes:

 Before copying the files to the SD card, SD card must be formatted, note before

 each copy should be formatted.

 SD cards must be formatted as "FAT" format.