Animal Cages Mesh Welding Machine 动物笼网焊接机

Product Description

功能特点

1. This kind machine is a manufacture mesh making machine used for poultry cage wire 2~3.5mm. It adopts electrical synchronous technique. Welding time and welding is controlled by integrated electric circuit. The machine welds the line wires and cross wires be solid mesh in the principle of multi-electrode resistance welding. It consists of welded equipment, line and cross wires feeding device, mesh stepping system and electrical control system. The material can be low carbon steel wire or galvanized wire.

这种机器是用来制造家禽笼网的设备、丝径2~3.5毫米。它采用了电器同步技术。焊接时间和焊接通过集成电路控制。径丝和十字丝由机器多电阻固定焊接。它由接设径丝和十字丝喂料装置、和集成电路系统组成。原材料可以用镀锌碳钢丝。

2. Line wire are in coil and be straightened by straightening wheel on the front of machine and then be put into the line wire entrance. Cross wire are pre straightened and pre cut by wire straightening and cutting machine

and then be put in the hopper. The hopper is equipped with step motor and a wheel. The cross wire is taken onto the welding plate by wheel. Step motor makes the cross wire falling more accurate. Besides, cross wire monitoring system can be installed to stop the machine in case cross wire is used up or get stuck.

线圈/放线盘里的径丝通过机器前面的直丝轮拉直、然后进入径丝入口。十字丝预先通过直丝机和裁剪机拉直裁剪、然后进入料斗。料斗包括步进电机和喂料轮。纬丝通过喂料轮带入焊接平台。步进电机会使十字丝准确落丝。除此之外、纬丝监控系统在纬丝用完了或者纬丝卡死了的情况下会将机器停止。

3. The mesh aperture size can be adjusted. The line wire space can be adjusted through adjusting the electrode space. The cross wire space can be adjusted by PLC control panel.

焊网孔径尺寸可以调节。径丝间距也通过调整电极距离。纬丝距离可以通过集成电路控制面板来调节。

4. Welding adopts late-model efficient welding transformer. The voltage adjusting range is big which enlarge the range of wire diameter size. It is adjusted through the electricity current button on the front panel.

焊接采用新型高效的电焊变压器。调节电压范围通过调节焊丝直径尺寸来打范围调节。也可以通过前面的电流按钮来调节。 Current-----电流

5. In order to adapt the capacity of the clients’, welding transformers don’t work at the same time but separately and one by one when welding the same row of cross wire.

为了满足客户要求、除了纬丝在同一行一个一个焊接时焊接变压器不会同时工作。变压器分开焊接，这样对电源的要求就低。

6. Welding Speed: 60~80 times/minute, the work speed mainly depends on material of the raw material, steel bar diameter, space of the mesh, choice of welding parameter, proficiency of workers, etc.

焊接速度：60~80次每分钟、焊接速度取决于原材料、钢筋直径、焊网间距、焊接参数系数、工人熟练度等其他。

7. The finished product can be in roll or in panel. If you want roll you will need a wire mesh roller and if you want panel you will need a wire mesh cutting machine or to cut it manually with a electric scissors.

产品可以成卷或者成平面。如果你想要成卷你需要一个网辊。如果你想成平面你需要一个裁剪机或者用电动剪刀手动裁剪。

Main parameter of manufacture mesh making machine

制网机主要参数

wire diameter:2-3.5mm

rated voltage:380V 50HZ

welding aperture:50x50-150x150mm

rated electrical power:2X75KVA

width of mesh:1200

overall dimension:1.8x2.5x1.8m

number of warp:customized

machine weight:3.2T

welding speed:60strokes/min

Packaging & Shipping包装和运输

The spare parts and control cabinet will be loaded in wooden box.

备件和控制箱用木箱装载。

The main machine is nude packing.it need one 20' container.

主机不使用任何包装。它需要20尺的集装箱装载。

Accessories:

附件

Wire Cutting and Straightening Machine

裁丝机和直丝机