HUBEI Manten Automobile produce the lpg gas refilling plant is mainly use for tanks over 50cbm 100cbm. It shall include the following parts: tank farm (storage tank, residual liquid tank, ladder, protective wall, etc.), compressor room (compressor and related motor), steam tank loading and unloading platform (raw material source loading and unloading place), power transformation and distribution room (power transformation and distribution equipment), gas island (gas dispenser, gas filling electric scale, etc.), lightning protection tower, fire-fighting facilities, office and living buildings, etc.

LPG gas cylinder filling plant Manufacturers & Suppliers

1. The LPG Filling Plant support to use large volume tanks, such as 50cbm or 100cbm. Also support to put several units of 100cbm tanks together, and the pipes will connect together to set up a big filling plant for supply lpg to users.

2. All the tanks perform MT, UT, and RT test. also water pressure test, air tighness test, and heat treatment, and issue the products qualified certificate before the products shipping.

3. The lpg filling plant installation supplied with compressor, pump motor, electric refilling scale, dispenser also. The large gas filling plant requires professional engineer to design the structure of the gas plant.

4. Remote control monitor, the lpg cylinder filling plant can install the remote control monitor to check the gas loading and refilling percentage.

5. Safety Refilling. Outdoor fire hydrants and mobile fire extinguishers must be set in the gas filling station, and fixed sprinklers shall be set for storage tanks. Necessary dry powder fire extinguishers shall be set in the gas island, storage tank farm, control room and unloading area according to the specifications, and the tank farm drainage facilities shall be equipped with water sealed wells. In order to ensure safety and facilitate management, the emergency shut-off valve installed on the gas and liquid phase outlet pipe of the storage tank and the gas and liquid phase connection pipe of the gas dispenser should be pneumatic valve, and the operation button should be set in the gas dispensing area, control room, storage tank area, etc. to facilitate emergency treatment at any place in an emergency state.

As a professional truck company, Manten has high-quality truck for sale. Welcome to contact us if needed.