Acrel AKH-0.66/K series current transformer split core are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which prevents the normal utilization of electricity.

AKH-0.66/K Series Split Type Current Transformer Diagram

Hold the lower section firmly at the direction of arrow

Loosen two screws at the direction of arrow and remove them

Separate the lower section at the direction of arrow

Mount the copper bar and assemble the lower section at the direction of arrow

Hold it firmly at the direction of arrow

Hold the lower section firmly at the direction arrow, insert two screws and tighten nuts

Fix the copperbar with M5screwsand pressure plates

Acrel AKH-0.66/K Series SCT Current Transformers Uses

Our flexible split core current transformers are effectively used in reconstructing projects of urban

Split core current transformers are suitable for rural power grids to reconstruct

Split Core Current Transformer Installation

Press the arrow direction firmly to open the two screws and press the lower part

Unscrew and pull out the two screws in the direction of the arrow, see "P2"

Pull the screw and pull out the lower part in the direction of the arrow

After installing on the copper busbar, close the lower part in the direction of the arrow, see "P4"

Press firmly in the direction of the arrow

Press the lower part firmly and press the arrow direction to insert the two screws into the holes and tighten the screw width, see "P6"

Then use MS screws and pressure plate to install and press the steel row according to "P6"

For more information about ac current transducer, please feel free to contact us!